器件名称详细搜索
产品SN74HC191TI
描述

The 'HC191 devices are 4-bit synchronous, reversible, up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters. The outputs of the four flip-flops are triggered on a low- to high-level transition of the clock (CLK) input if the count-enable (CTEN) input is low. A high at CTEN inhibits counting. The direction of the count is determined by the level of the down/up (D/U) input. When D/U is low, the counter counts up, and when D/U is high, it counts down. These counters feature a fully independent clock circuit. Change at the control (CTEN and D/U) inputs that modifies the operating mode have no effect on the contents of the counter until clocking occurs. The function of the counter is dictated solely by the condition meeting the stable setup and hold times. These counters are fully programmable; that is, each of the outputs can be preset to either level by placing a low on the load (LOAD) input and entering the desired data at the data inputs. The output changes to agree with the data inputs independently of the level of CLK. This feature allows the counters to be used as modulo-N dividers simply by modifying the count length with the preset inputs. Two outputs are available to perform the cascading function: ripple clock (RCO) and maximum/minimum (MAX/MIN) count. MAX/MIN produces a high-level output pulse with a duration approximately equal to one complete cycle of the clock while the count is zero (all outputs low) counting down, or maximum (9 or 15) counting up. RCO produces a low-level output pulse under those same conditions, but only while CLK is low. The counters can be cascaded easily by feeding RCO to CTEN of the succeeding counter if parallel clocking is used, or to CLK if parallel enabling is used. MAX/MIN can be used to accomplish look ahead for high-speed operation.

操作查看详情点击下载购买

目录

01540123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
制造商型号分类描述下载
Littelfuse Inc

Littelfuse Inc

0154.250DR电路保护保险丝surface mount fuses fuseblck w/ fuse.25a omni blok 154
Littelfuse Inc

Littelfuse Inc

0154003.DRT电路保护保险丝surface mount fuses fuseblock w/ fuse 3A omni blok 154t
Littelfuse Inc

Littelfuse Inc

0154004.DRT电路保护保险丝surface mount fuses fuseblock w/ fuse 4A omni blok 154t
Littelfuse Inc

Littelfuse Inc

015403.5DRT电路保护保险丝surface mount fuses fuseblck w/ fuse3.5a omni blok 154t
Littelfuse Inc

Littelfuse Inc

0154.750DRT电路保护保险丝surface mount fuses fuseblck w/ fuse.75a omni blok 154t
Littelfuse Inc

Littelfuse Inc

0154001.DRTL电路保护保险丝surface mount fuses acs smf omni-blok SB rohs 260c 1A
Littelfuse Inc

Littelfuse Inc

0154.500DRT电路保护保险丝surface mount fuses fuseblck w/ fuse .5a omni blok 154t
Littelfuse Inc

Littelfuse Inc

0154002.DRTL电路保护保险丝surface mount fuses acs smf omni-blok SB rohs 260c 2A
Littelfuse Inc

Littelfuse Inc

0154.750DRTL电路保护保险丝surface mount fuses acs smf omni-blok SB rohs 260c .750a
Littelfuse, Inc.

Littelfuse, Inc...

0154008DR保险丝支架,夹子&am...FUSE HOLDER SMF OMNI BLOCK FUSE BLOCK, 154 008