器件名称详细搜索
产品SN74HC163TI
描述

These synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. The 'HC163 devices are 4-bit binary counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the count-enable (ENP, ENT) inputs and internal gating. This mode of operation eliminates the output counting spikes normally associated with synchronous (ripple-clock) counters. A buffered clock (CLK) input triggers the four flip-flops on the rising (positive-going) edge of the clock waveform. These counters are fully programmable; that is, they can be preset to any number between 0 and 9 or 15. As presetting is synchronous, setting up a low level at the load input disables the counter and causes the outputs to agree with the setup data after the next clock pulse, regardless of the levels of the enable inputs. The clear function for the 'HC163 devices is synchronous. A low level at the clear (CLR) input sets all four of the flip-flop outputs low after the next low-to-high transition of CLK, regardless of the levels of the enable inputs. This synchronous clear allows the count length to be modified easily by decoding the Q outputs for the maximum count desired. The active-low output of the gate used for decoding is connected to CLR to synchronously clear the counter to 0000 (LLLL). The carry look-ahead circuitry provides for cascading counters for n-bit synchronous applications without additional gating. ENP, ENT, and a ripple-carry output (RCO) are instrumental in accomplishing this function. Both ENP and ENT must be high to count, and ENT is fed forward to enable RCO. Enabling RCO produces a high-level pulse while the count is maximum (9 or 15 with QA high). This high-level overflow ripple-carry pulse can be used to enable successive cascaded stages. Transitions at ENP or ENT are allowed, regardless of the level of CLK. These counters feature a fully independent clock circuit. Changes at control inputs (ENP, ENT, or LOAD) that modify the operating mode have no effect on the contents of the counter until clocking occurs. The function of the counter (whether enabled, disabled, loading, or counting) is dictated solely by the conditions meeting the stable setup and hold times.

操作查看详情点击下载购买

目录

00820123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
制造商型号分类描述下载
AVX / Kyocera

AVX / Kyocera

008283021200000...连接器集管和线壳headers & wire housings connectOR - other connect
Molex

Molex

0082285516电线和电缆扁平带状电缆rib cbl 050 100rl topct 16ckt 28
Molex

Molex

0082226105电线和电缆扁平带状电缆rib cbl .100 100rl tin 5ckt 22aw
AVX Corporation

AVX Corporation

008283061200000连接器集管和线壳headers & wire housings 6P straight plug
AVX Corporation

AVX Corporation

008289026009113连接器集管和线壳headers & wire housings 26p std eject hedr prs fit, gld/nkl plt
AVX Corporation

AVX Corporation

008283041200000连接器集管和线壳headers & wire housings 4P striaght plug
AVX Corporation

AVX Corporation

008289040002111连接器集管和线壳headers & wire housings 40p strt header ltch/ejct lever
AVX Corporation

AVX Corporation

008261023210806连接器集管和线壳headers & wire housings 2cont dual row square post
AVX Corporation

AVX Corporation

008290040000041连接器集管和线壳headers & wire housings 40p idc socket wo/sr
AVX Corporation

AVX Corporation

008223048721107连接器底板连接器rack & panel connectors 48p dual row SQ grid PC solder tail